.avif)
Hoppers
Application specific feed
hoppers configured to maximize efficiency and thruput.
hoppers configured to maximize efficiency and thruput.
.avif)
Drive Configurations
Electric, hydraulic, and SmartDrive™ options available to
meet requirements of the application.
meet requirements of the application.
Patented SSP
Severe Shock Protection [SSP] protects drive system in the event that the shaft stop.
.avif)
Direct Drive
Simple and efficient drive with no belts to maintain.
.avif)
Cleaning Fingers
Keeps shredded material from building between cutters.
.avif)
Pierce-Point Cutters
Effectively pull material into the center of the cutting chamber and cut it into trips approximately the same width as the cutter.
.avif)
Patented ACLS™
Advanced Cutter Locking System (ACLS) efficiently maintains a tight cutter stack, minimizes maintenance, and prolongs cutter life.
.avif)
Seal & BEaring Protection
Advanced Cutter Locking System (ACLS) efficiently maintains a tight cutter stack, minimizes maintenance, and prolongs cutter life.
Details
Dual-Shear® M180 industrial shredders are adaptable machines for use in volume reduction, product destruction or pre-conditioning (primary shredding) where particle size variation is acceptable. Output consists of “strips” the width of the cutters - usually 25 - 76 mm (1 - 3 in). Each Dual-Shear® M180 industrial shredder is engineered with cutter and drive configurations to match your product specifications.
Videos
Specifications
| Shredder Model | Dual-Shear® M180-ED |
|---|---|
| Drive | Dual Electric |
| Number of Motors | Two |
| Power (Range) | 596 kW (800 hp) |
| Voltage | 460/3/60 |
| Voltage Options | Many - Consult Factory |
| Autochop Feature | N/A |
| Shock Load Protection | Yes (SSP™) |
| Cutter Thickness (nominal) | 76 mm (3 in) |
| Cutter Diameter | 864 mm (34 in) |
| Cutter Material | HW5 |
| Shaft Diameter | |
| Number of Cutters | |
| Rotor Diameter | |
| Rotor Speed (rpm) | |
| Screen Sizes | |
| Active Rotor Length | |
| Cutting Chamber (WxL) | 1,800 x 1,920 mm (71” x 76”) |
| Hopper Capacity | |
| Machine Length | |
| Machine Width | |
| Machine Height | |
| Machine Weight | 39,600 kg (88,000 lbs) |
| Hydraulic Ram | |
| Hopper Opening | |
| Hopper Height | |
| Stand Height | 2,362 mm (93 in) |
| HPU Configuration | N/A |
| HPU Dimensions | N/A |
| HPU Weight | N/A |
| Shredder Model | Dual-Shear® M180-HD |
|---|---|
| Drive | Dual Hydraulic |
| Number of Motors | Two (HPU) |
| Power (Range) | 372 - 894 kW (500 - 1200 hp) |
| Voltage | 460/3/60 |
| Voltage Options | Many - Consult Factory |
| Autochop Feature | Included |
| Shock Load Protection | Yes (Multiple Relief) |
| Cutter Thickness (nominal) | 76 mm (3 in) |
| Cutter Diameter | 864 mm (34 in) |
| Cutter Material | HW5 |
| Shaft Diameter | |
| Number of Cutters | |
| Rotor Diameter | |
| Rotor Speed (rpm) | |
| Screen Sizes | |
| Active Rotor Length | |
| Cutting Chamber (WxL) | 1,800 x 1,920 mm (71” x 76”) |
| Hopper Capacity | |
| Machine Length | |
| Machine Width | |
| Machine Height | |
| Machine Weight | 39,600 kg (88,000 lbs) |
| Hydraulic Ram | |
| Hopper Opening | |
| Hopper Height | |
| Stand Height | 2,362 mm (93 in) |
| HPU Configuration | Open Loop |
| HPU Dimensions | 2.3 x 2.2 x 2.2 m (7.5’ x 7.4’ x 7.3’) |
| HPU Weight | 5,400 kg (12,000 lbs) |
Chamber & Particles
