Parts Request

SSI Shredding Systems provides innovative engineered designs, superior quality manufacturing and expert service for the industrial shredder and compaction industry worldwide.

At SSI, your long-term satisfaction is extremely important to us. Superior quality components, on-site diagnostics and factory technicians available 24 hours a day are just a few reasons why SSI has become the industry standard in shredder parts and service.


For inquiries, contact us at parts-service@ssiworld.com

Service RequestCutter Rebuild Request
Uni-Shear®
Dual-Shear®
Quad®
Pri-Max®

Screen

Screen elements should be changed and replaced when screen has sufficient wear.
Add to request
Screen
 parts have been added to your request form.
View Request Form

Bearings

Bearings should be replaced at recommended intervals to maintains efficiency.
Add to request
Bearings
 parts have been added to your request form.
View Request Form

Seals

It is best practice to replace seals every time you service the shredder head.
Add to request
Seals
 parts have been added to your request form.
View Request Form

Cutters

Cutters should be replaced after rotating them all available times.
Add to request
Cutters
 parts have been added to your request form.
View Request Form

Cutter Holders

Steel cutter holders.
Add to request
Cutter Holders
 parts have been added to your request form.
View Request Form

Anvils

Once anvils are worn past adjustable range they should be replaced.
Add to request
Anvils
 parts have been added to your request form.
View Request Form

Gears

Gears endure considerable force and should be replaced at recommended intervals to mitigate risk of failure.
Add to request
Gears
 parts have been added to your request form.
View Request Form
Scroll horizontally to view the whole system.

Uni-Shear® Request Form

To help us understand your parts needs better, please complete the form below. We will review your information and an SSI representative will contact you promptly. Thanks for contacting SSI Shredding Systems!

Replacement Parts Needed

We have received your form inquiry successfully and an SSI representative will be in touch with you shortly.
Thank you for contacting SSI!
Oops! Something went wrong while submitting the form.

Bearings

Bearings should be replaced at recommended intervals to maintains efficiency.
Add to request
Bearings
 parts have been added to your request form.
View Request Form

Seals

It is best practice to replace seals every time you service the shredder head.
Add to request
Seals
 parts have been added to your request form.
View Request Form

Splash Plate

These replaceable “false walls” are part of our proprietary bearing protection system, and they also isolate the bearings from the action in the cutting chamber.
Add to request
Splash Plate
 parts have been added to your request form.
View Request Form

Cleaning Fingers

Individually removable cleaning fingers minimize wrapping and material buildup in the machine and make service easier.
Add to request
Cleaning Fingers
 parts have been added to your request form.
View Request Form

Cutters

Cutters are selected to maximize shredder performance in the application each customer desires. They can be removed from the machine individually and can normally be rebuilt and re-used multiple times.
Add to request
Cutters
 parts have been added to your request form.
View Request Form

Spacers

Spacers that fit between cutters also protect shafts from damage. Can be replaced individually.
Add to request
Spacers
 parts have been added to your request form.
View Request Form

Shafts

High strength shafts remain supported when the shredder is being serviced. They are also protected by wear parts, which extends their life considerably.
Add to request
Shafts
 parts have been added to your request form.
View Request Form

Gears

Gears endure considerable force and should be replaced at recommended intervals to mitigate risk of failure.
Add to request
Gears
 parts have been added to your request form.
View Request Form
Scroll horizontally to view the whole system.

Dual-Shear® Parts Request Form

To help us understand your parts needs better, please complete the form below. We will review your information and an SSI representative will contact you promptly. Thanks for contacting SSI Shredding Systems!

Replacement Parts Needed

We have received your form inquiry successfully and an SSI representative will be in touch with you shortly.
Thank you for contacting SSI!
Oops! Something went wrong while submitting the form.

Screen

Screen elements should be replaced when needed to maintain production and ensure accurate output.
Add to request
Screen
 parts have been added to your request form.
View Request Form

Bearings

Bearings should be replaced at recommended intervals to maintains efficiency.
Add to request
Bearings
 parts have been added to your request form.
View Request Form

Seals

It is best practice to replace seals every time you service the shredder head.
Add to request
Seals
 parts have been added to your request form.
View Request Form

Splash Plate

These replaceable “false walls” are part of our proprietary bearing protection system, and they also isolate the bearings from the action in the cutting chamber.
Add to request
Splash Plate
 parts have been added to your request form.
View Request Form

Lower Cutters

Cutters are selected to maximize shredder performance in the application each customer desires. They can be removed from the machine individually and can normally be rebuilt and re-used multiple times.
Add to request
Lower Cutters
 parts have been added to your request form.
View Request Form

Upper Cutters

Cutters are selected to maximize shredder performance in the application each customer desires. They can be removed from the machine individually and can normally be rebuilt and re-used multiple times.
Add to request
Upper Cutters
 parts have been added to your request form.
View Request Form

Spacers

It is best practice to replace seals every time you service the shredder head.
Add to request
Spacers
 parts have been added to your request form.
View Request Form

Shafts

High strength shafts remain supported when the shredder is being serviced. They are also protected by wear parts, which extends their life considerably.
Add to request
Shafts
 parts have been added to your request form.
View Request Form

Gears

Gears endure considerable force and should be replaced at recommended intervals to mitigate risk of failure.
Add to request
Gears
 parts have been added to your request form.
View Request Form
Scroll horizontally to view the whole system.

Quad® Parts Request Form

To help us understand your parts needs better, please complete the form below. We will review your information and an SSI representative will contact you promptly. Thanks for contacting SSI Shredding Systems!

Replacement Parts Needed

We have received your form inquiry successfully and an SSI representative will be in touch with you shortly.
Thank you for contacting SSI!
Oops! Something went wrong while submitting the form.

Bearings

Bearings should be replaced at recommended intervals to maintains efficiency.
Add to request
Bearings
 parts have been added to your request form.
View Request Form

Seals

It is best practice to replace seals every time you service the shredder head.
Add to request
Seals
 parts have been added to your request form.
View Request Form

Cutters

Bi-directional cutters. Can be replaced individually.
Add to request
Cutters
 parts have been added to your request form.
View Request Form

Spacers

Spacers that fit between cutters also protect shafts from damage. Can be replaced individually.
Add to request
Spacers
 parts have been added to your request form.
View Request Form

View Cartridge

Replaceable wear surface for cutting table.
Add to request
View Cartridge
 parts have been added to your request form.
View Request Form

Gears

Gears endure considerable force and should be replaced at recommended intervals to mitigate risk of failure.
Add to request
Gears
 parts have been added to your request form.
View Request Form
Scroll horizontally to view the whole system.

Pri-max® Request Form

To help us understand your parts needs better, please complete the form below. We will review your information and an SSI representative will contact you promptly. Thanks for contacting SSI Shredding Systems!

Replacement Parts Needed

We have received your form inquiry successfully and an SSI representative will be in touch with you shortly.
Thank you for contacting SSI!
Oops! Something went wrong while submitting the form.

Industrial Shredder Parts

Whether you have an SSI shredder or another brand, you can count on SSI Shredding Systems to support your parts needs, wherever you are in the world. SSI has built one of the largest shredder replacement parts networks in the industry. Our comprehensive inventory has made us the leading supplier of shredder components worldwide that meet or exceed OEM requirements. SSI parts specialists can help you order the right part to fix your problem. Our Parts department is not just a call center, we are people who know shredders.

Gears

Large bull gears are found inside the shredder gearbox in either the Dual-Shear® or Quad® machines.

Cutters

Cutters are installed onto the shafts of any of the Dual-Shear®, Quad® or Uni-Shear® shredding machine.

Seals

Shaft seals are found at either end of the cutting chamber on both the Dual-Shear® or Quad® machines.

Shafts

Drive and driven shafts can be found in either the Dual-Shear® or Quad® shear machines.

Cleaning Fingers

Cleaning fingers prevent material from accumulating between cutters or wrapping around the shredder’s shaft. They also provide extra shaft support in applications which experience shaft flexing. These flat steel plates attach to the side walls of a shredder’s cutting chamber. The semicircular fingers extend between the shredder’s cutters with finger notches fitting closely around the spacer.

SSI offers segmented, or ‘floating,’ cleaning fingers held in place by retaining brackets on each side of the cutting chamber. The segmented design allows easy removal (via the shredder’s endplate area), as well as repositioning should the cutter stack arrangement be modified, or if cutter thicknesses change through rebuilding.

SSI’s individual, segmented design of the fingers allow for much easier maintenance than the traditional, unibody, “comb” arrangement used by other manufacturers. SSI cleaning fingers can be accessed directly and more safely from the top.

Bearings

Endplate or gearbox bearings found in either the Dual-Shear® or Quad® machine.

Anvils

An anvil is the stationary cutting surface found on SSI's Uni-Shear® single rotor machines

Holders

Cutter holders for our single rotor Uni-Shear® machines.

Ready to start shredding?

Our team is standing by to help you find the ideal shredding solution for your company.

Contact Sales